Advertisement
3. Wi-Fi logger network configuration
：
Please note
Wi-Fi logger only supports 2.4GHz Wi-Fi network，5GHz Wi-Fi cannot be connected.
(1) Turn on the Bluetooth, Wi-Fi and location services (GPS) of the mobile device.
(2) Press the white button on the front of the logger for 2~6 seconds and then release it until the
NET indicator on the logger flashes quickly, at this time the logger enters the config network
mode (the NET light of the logger is always on during the network config process) .
(3) After logging in to the Pylontech Home App, enter the "Me" page and select "Config Network".
At this time, the window will automatically pop up "Network Configuration Instructions" (new
configuration instructions and screenshots are required), reading this instruction can guide you
in network configuration.
(4) Select the Wi-Fi network to be configured and enter the corresponding network password.
6 / 15
Advertisement
