General Instructions - Zebronics ZEB-LEGEND Operator's Manual

General Instructions

BT Mode:
Turn on the speaker and short press "mode
button" to switch to BT mode. Now turn your BT
on your phone, tablet or computer and click on
scan for nearby BT devices. Once the search is
completed search for the BT name "ZEB-
LEGEND" and tap on it to pair with your device.
USB Mode:
The speaker automatically switches to USB
Input Mode when the USB flash drive is
plugged into the USB slot of the speaker.
Note: This mode is not available until USB flash drive is
inserted. Also, please make sure that your flash drive
has MP3 audio files other audio file formats are not
supported.
FM Radio:
Switch to FM mode by pressing the mode
button in remote, then short press the Play /
Pause button to Scan for the available FM
channels. Once the scanning process is done,
the speaker plays the first scanned FM
channel. Now press on the next / prev button
on the front panel to switch to the previous or
next scanned FM channel. Alternatively you
can use the remote control to switch the FM
channel by pressing the Numeric pad of the
remote control.