Huawei OptiXstar B671G Quick Start Manual page 24

OptiXstar B671G Quick Start
Figure 6-2 Connecting a photoelectric composite cable
Figure 6-3 Removing a photoelectric composite cable
Pay attention to the following points when bundling the cables:


Issue 04 (2023-10-30)
For details about the restrictions on the power supply distance of a photoelectric composite cable, see the
corresponding cable description.
When connecting a photoelectric composite cable, ensure that the cable is inserted in the correct
direction. Do not frequently insert and remove the cable.
The power over fiber (POF) output voltage is 56 V. Exercise caution when using the device.
Different types of cables must be separately routed with the minimum spacing of 30 mm
and cannot be entangled or crossed. Cables should be parallel or separated using
dedicated separators.
The cables must be bound tightly and neatly, and the cable sheaths must not be damaged.
Copyright © Huawei Technologies Co., Ltd.
6 Connecting Cables to the B671G
20