Cal Spas PATIO Owner's Manual page 72

72
BALBOA WATER GROUP
INITIAL SETUP
5- Launch the BWA app and select inital set up.
6- Once selected follow the steps presented to you within the app, it will attempt to communicate
with the module to establish its first inital connection.
7- After following the steps presented in the app you will be greeted with the sceen above, you will
now be able to control the spa using the modules local wifi network.
8- Test the communication of the module with the app by turning on your pump or ligh option.
68
BWA APP FOR IOS & ANDROID DEVICES
1. O
2. P
t
3. Y
t
m
4. T
s
5. T
O
73