Cal Spas PATIO Owner's Manual page 44

44
Main Screen
* View page 10 for information on navigating the Settings menu.
Balboa Water Group | Your Single Source Solution
HEAT SETTINGS
HEAT MODES
A
Follow these steps to view the current Heat Mode
and/or change the Heat Mode:
1 - Navigate to Heat (A).*
2 - Press the SELECT navigation button to view the
Heat screen (B). The current Heat Mode will appear
here (C). In this example the current Heat Mode is Rest.
There are two Heat Modes to choose from: Ready, Rest.
B
3 - Press the SELECT navigation button to change the
Heat Mode to Ready (D).
You have set the Heat Mode to Ready.
C
The change takes effect immediately. No need to press
a Save button
Ready-In-Rest Mode is a third Heat Mode. But, it is a
sub-feature of Rest Mode and is not selectable from the
panel menu.
The only place you can see whether you're in
Ready-in-Rest Mode is on the Main screen, where it
shows all three Heat Modes in icon form.
If you are in Ready-in-Rest Mode, and you want to
cancel it (ie, you want to return to Rest Mode), just go
D
view the current Heat Mode (where it will say Rest
Mode) and exit. That simple action takes you back to
Rest Mode
Where can I view the current Heat Mode on
the Main screen?
The current Heat Mode is displayed here with an icon
(E). In this example the current Heat Mode is Ready.
The following list shows which icons may appear on the
Main screen.
E
Heat Mode Icons
Ready:
Rest:
Ready-in-Rest:

4