Oneida Air Systems AHR000025 Instruction Manual page 9

Assembly Instructions (continued)
Secure the Hose (L) to the Handle Side
12
Assembly (A3) with the Self-Drilling Screw
(K) and 3" Loop Clamp (J) as shown in [FIG
12].
Note: DO NOT screw into recessed portions of
the Core (A1).
Guide the Hose (L) as you wind it around the
13
Core (A1) of the Body Assembly (A) so it is
neatly wrapped as shown in [FIG. 13].
FIG.12
FIG. 13
oneida-air.com 9