Advertisement
Assembly Instructions (continued)
Assembly Instructions
Partially tighten the Turn Key Hose Clamp
11
(M) onto the Outlet Coupler (E) as shown in
[FIG. 11a].
Feed the clamped end of the Hose (L) through
the access hole in the Core (A1) closest to the
Handle Side Assembly (A3) [FIG. 11b].
Then attach the Hose to the Outlet Coupler.
You can guide the Hose by using the
secondary access hole in the Core closest to
the Outlet & Brake Side Assembly (A4). Secure
in place by firmly tightening the Turn Key
Hose Clamp on the Outlet Coupler [FIG 11c].
Note: To permanently install the Hose, silicone
can be applied to the Hose's cuff prior to being
inserted into the Outlet Coupler.
8
Oneida Air Systems
Interior
View
FIG. 11a
FIG. 11b
Interior
View
FIG. 11c
Advertisement
