Advertisement
Assembly Instructions
the Wall Bracket should Be Mounted to a sturdY, reinforced Wall (e.g. concrete Wall,
Ÿ
Wood-fraMed Wall, etc.) Wall anchors can Be used if Mounting on drYWall. the included
teMplate indicates the proper drill holes and the full, asseMBled size of the Wall
Bracket.
Mark a straight level line. Align the top of
6
the Template (N) with the marked line and
temporarily secure the template to the wall
with a tack or non-marking tape [FIG. 6a].
Place a mark through the template's paper at
each indicated crosshair (four bi-directional
keyway holes), then remove the template from
the wall [FIG. 6b].
Note: DO NOT FLIP THE TEMPLATE! The
dimensions of the template are accurate to
either orientation of the Hose Reel.
The central keyway holes can be used to further
secure the bracket if standard 16" on-center stud
spacing is not available.
Using appropriate fasteners for the wall type
7
you are installing your system onto, drill into
and install fasteners into the wall at all marked
locations.
a. Maximum Fastener Size: 3/8" diameter
b. Maximum Washer Size: 5/8" outside
diameter
Place washers onto each fastener and thread
the fasteners into all four holes, leaving at least
1/2" outside of the hole to fit the Hose Reel
Assembly [FIG. 7].
6
Oneida Air Systems
Rev: C 20230504LL
Hose Reel Template
#ZBT000003
drill here
drill here
drill here
leVel this line
leVel this line
16"
406 mm
Hose reel template
8-1/2"
216mm
the hose reel should be mounted to a sturdy, reinforced wall (e.g.
concrete wall, brick wall, wood-framed wall, etc.) Wall anchors can
be used if mounting on drywall. this template indicates the proper
drill holes and the full, assembled size of the hose reel.
Hose reel Mounting Positions
The Hose Reel can be mounted so that the Handle is on either side
as the keyholes are bi-directional. This does not require rotating the
templlate. Decide how you want your Hose Reel oriented during
installation to best meet your shop's needs.
drill here
drill here
drill here
8"
8"
203 mm
203 mm
FIG. 6a
Hose
Reel
Wall
FIG. 7
Mark
Here
FIG. 6b
Advertisement
