Advertisement
Table of Contents
Rev: A 20230314LL
InstructIon sHeet
1-800-732-4065
Once you complete installation of your Hose Reel, please either
scan the QR code or visit oneidaair.wufoo.com/forms/hose-tester
to provide your honest feedback to help us make a great product!
Doc. #ZBI000054
Hose Reel
#AHR000025
oneida-air.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Oneida Air Systems AHR000025
Summary of Contents for Oneida Air Systems AHR000025
- Page 1 Rev: A 20230314LL Doc. #ZBI000054 InstructIon sHeet Hose Reel #AHR000025 Once you complete installation of your Hose Reel, please either scan the QR code or visit oneidaair.wufoo.com/forms/hose-tester to provide your honest feedback to help us make a great product! 1-800-732-4065...
- Page 2 AHH500513 Handle ACL000003 3" Loop Clamp AFS000004 --------------- Screw #10 x 1/2'' Self-Drilling Screw --------------- VSHRFB250 Spring 2.50" X 25' Hose ACB360000 DFH000025 2.5" Outlet Coupler Turn Key Hose Clamp AFS000011 8-32 x 3/8” Button Head Screw Oneida Air Systems...
- Page 3 Assembly Instructions You will need the following tools: Wall MOuntIng BR aCke t Stud Finder Light Adhesive Tape Allen Wrench Clamp Tack / Center Punch / Nail Tape Measure / Ruler Flathead Screwdriver Power Drill Wall Mounting Fasteners * Level Tool Pencil / Marker Drill Bit (for your wall fastener) *You will need to supply your own wall mounting hardware.
- Page 4 Maximum Washer Size: 5/8" outside diameter Place washers onto each fastener and thread the fasteners into all four holes, leaving at least 1/2" outside of the hole to fit the Hose Reel Assembly [FIG. 4]. FIG. 4 Oneida Air Systems...
- Page 5 Assembly Instructions (continued) Lift the Hose Reel Assembly up and over the fasteners so that the washer is on the inside of the Hose Reel [FIG 5a]. Slide the Hose Reel Assembly down so that the fastener is snugly inside the smaller section of each keyhole [FIG 5b].
- Page 6 Hose to the Outlet Coupler (C). You can guide the Hose by using the other access hole in the Core closest to the Outlet & Brake Side Assembly (A4) [FIG 8b]. FIG. 8a Interior View FIG. 8b Oneida Air Systems...
- Page 7 Assembly Instructions (continued) Secure the Hose (J) to the Handle Side Assembly (A3) with the Self-tapping Screw (I) [FIG 9]. FIG.9 Guide the Hose (J) as you wind it around the Core (A1) of the Body Assembly (A) so it is neatly wrapped as shown in [FIG.
- Page 8 Regardless of where you purchased your system, if you have any questions or issues with missing / damaged parts, please call Oneida Air Systems first to let us help resolve your problem. We fully stand behind the quality of our product and place the utmost value on our customer’s satisfaction.
Need help?
Do you have a question about the AHR000025 and is the answer not in the manual?
Questions and answers