HYSEN HY02TPR Quick Start Manual

Programmable Plug In Thermostat
1.Product Instruction
This is programming plug in thermostat,it is used for controlling air conditioner,carbon crystal heating
panel,electric heating oven,heater and so on cooling heating devices,it is used conveniently and beautiful
structure.
2.Technical Data
Voltage:AC200~240V, 50HZ
Load Current:16A(electric heating)
Temperature Control Precision:±0.5ºC
3.Button Function Instruction
NO. symbols Represent
1 Power On/Off
Selection Setting:short press to switch manual mode/programming mode;long press for
2
3 seconds to enter set clock and timing on/off.
Confirm Button/Enter Button, long press for 3 seconds to enter programming mode
3
setting.
Increase Button,short press for increase value;long press for 3 seconds to enter
4
advanced setting
5 Decrease Button, shortpress for decrease value;long press for 3 seconds to unlock
Indicator
6 Light on is heating on,light off is heating off
4.Display And Function Instruction
Temperature Setting Range:5ºC - 35ºC
Self Consumption Power:<1.5W
Temperature Sensor:NTC
NO. symbols Explanation
1
Programming mode
2
Manual mode
When programming mode,it need
set temperature,it can press "
" " to adjust.Enter into temporary
3
manual mode " " and "
when enter into next period"
disappear,thermostat run
period of setting previously.
Heating mode:relay connect,it will
display " "
4
On power off
Anti-freezing function
connect,it will display " "
Cooling mode:relay connect,it will
5
display" "
6
6 periods programming icon
7
Timing on/off icon
8
Room temperature
Children lock:no any operation for 10
minutes,buttons will
automatically,Press down
" for 3 seconds also can lock
"
9
buttons,it will display lock icon on
screen,unlock method:long
power button " " for 3 seconds
then move your finger.
10
Windows open mode
11
Clock setting icon
5.Quick Instruction Of Operation Icon
"or
6.Clock setting/Timing on/off setting.
" flashing,
" will
to the
state,when
open,relay
Setting Screen
1) Clock Setting
Long press" " for 3 seconds then enter setting
screen,short press" "to
icon( flashing),press "
displays minute,hour,week, minute flashing then press
" " or " " to adjust value. Press "
switch to next hour ,week setting,it is the same as
minute setting.Press " " button to save all time setting
and return to previous screen.
2) Timing On/Off Setting
Long press" " for 3 seconds then enter setting
lock
screen,short press" "to choose"
button
set time of timing on;press "
value.Press" " to choose"
press
.
off Cancel timing on/off:press "
00:00,press " " to set
automatically after setting finished 5 seconds,or press
" " button return to previous screen.
choose " "
" enter clock setting,it
" to confirm and
"( flashing) to
" or " " to adjust
" and set timing
" to set as
as 00:00.It will quit