13.1 CCA test settings
CCA
Alternator
Crank
History
Setting
Note:
The product retains the parameters of your previous test. You must change the parameters each time you test a
different battery.
Setting
EN, SAE, JIS, DIN, IEC
VRLA_GEL, EFB, AGM_FLAT,
REGULAR_LIQUID,
AGM_SPIRAL
CCA ---
13.2 Battery test results
Message
GOOD BATTERY
GOOD-RECHARGE
RECHARGE & RETEST
REPLACE BATTERY
BAD CELL-REPLACE
14 Alternator test
An alternator test checks the performance of a vehicle's charging system through the alternator's ability to generate
enough voltage and current.
This test will determine if the alternator can maintain the battery charge and effectively supply power to the vehicle's
electrical components.
26
■
Access the settings via the main menu → CCA.
■
This test is only available for 12V batteries.
Description
■
Select a test standard.
■
For further information see:
Select the battery type.
■
Select the correct CCA rating.
■
CCA rating information should be marked on the battery.
Description
Battery is good and can be used.
Battery is good but should be recharged before use.
■
Fully recharge the battery and retest.
■
Replace the battery if the message appears after retesting a fully recharged
battery.
Replace the battery.
Replace the battery.
Supported battery standards [} 30]