Replacing A T/H Sensor - Huawei NetCol8000-C190 User Manual

NetCol8000-C190 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Singapore STT)
Figure 7-1 Removing air filters
Step 3 Install new air filters.
Step 4 On the home screen, choose Maint > Performance Maint to enter the
Performance Maint screen and clear the air filter runtime.
----End

7.2 Replacing a T/H Sensor

Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Open the front door.
Step 3 Remove the cable terminal from the T/H sensor.
Step 4 Pull out the T/H sensor upwards.
Issue 02 (2022-03-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
7 Parts Replacement
113