Carrier 40TGV0131UP Service Manual page 41

No. Item
8 Louver control
(Continued):
Outline of specifications
<<Individual air direction setup>>
• Pushing Louver select button enables every
discharge port to set up the air direction.
• In case of no input (key operation) for approx. 5 seconds
during setting of individual air direction (during displaying
of louver No. on the remote controller screen), the remote
controller screen returns to the normal display screen.
• For the air direction illustration during normal operation,
the air direction of the least No. among the louvers
which are block-set is displayed.
• While individual air direction is being set, the remote
controller operation (Illustration of air direction) and
operation of the real machine are linked.
• When selecting a case,
is not pushed or louver No. is not displayed, the air
directions of all the louvers are collectively set up.
Refrigerant pipe
Louver select button
Drain pipe
- 41 -
Remarks
Setup from the remote
controller without
button is
unavailable.
For the setup
operation, refer to
"How to set up louver
individually" of Item
"Setup at local site/
Others".