Table of Contents
Advertisement
VII. MAINTENANCE
PREVENTIVE
Bindicator does not provide a preventative maintenance schedule for the Yo-Yo Inventory Management System.
The interval for preventative maintenance depends on the application of the sensor and how often it is cycled.
However, the following checks are recommended.
1. Inspect the inside of the sensor enclosure. Check the mechanical side for excessive coating on the
cable or in the enclosure. Clean if necessary. If the problem continues or if dirt and debris are present on
the electrical side of the sensor, install a low-pressure air purge on the sensor. A 0.25 in. NPT fitting is
provided.
2. Inspect the weight and cable. If there is excessive wear on the cable, the cable may be rubbing on a
sharp edge of the nozzle or the entry into the tank.
3. Be sure the weight is securely attached to the cable. If a bottle-style weight is used, ensure that there are
no leaks and that the overall weight is between 20 ounces and 25 ounces.
4. Check that all wheels and arms move freely, particularly the count wheel.
REPLACEMENT PARTS
PART NUMBER DESCRIPTION
LBY211182
Plastic Bottle Weight (Poly)
LBY211188
Stainless Steel Bob Weight (Poly)
PVC Jacketed Bob Weight (Includes 50 ft
LBY211384
(15.24 m) of monofilament cable)
LBY211269
Plastic Spike Weight (Poly)
LBY211427
Stainless Steel Float
LBY211305
Low Density Plastic Weight
LBY231290
Polyester Cable
LBY231293
Monofilament Cable
LBY233255
Replacement Sensor E/U (120VAC)
LBY211453
Replacement Sensor E/U (240VAC)
LUC042827
Fuse, Sensor PCBA 80 mA TR5 Case
60119P009
Fuse, Display/Driver Board, 1A
RAD230007
Replacement Display Driver Board
LBY233258
Replacement LCD Display Board
LBY211451
GP-4 Motor Assembly (120 VAC)
LBY211452
GP-4 Motor Assembly (240 VAC)
LHY211581
Mark-4 Motor Assembly (120 VAC)
LHY211582
Mark-4 Motor Assembly (240 VAC)
LBY180112 Rev. B
LUC039209
Per Foot, Belden #9842 (2-pair, AWG 24)
500 ft (152.4 m) Roll, Belden #9842
LUC039210
(2-pair, AWG 24)
1,000 ft (304.8 m) Roll, Belden #9842
LUC039211
(2-pair, AWG 24)
Sensing Arm Assembly with
LBY211416
Wheel & Magnet
LBY233116
Gasket, Flange (Cover)
LBY233131
Gasket, Cover (Center Arm)
LHY233201
Gasket, Frame
Please consult with factory if unsure of parts required.
Not all parts fit all models.
19
www.bindicator.com
Advertisement
Table of Contents
