Table of Contents
Advertisement
www.bindicator.com
Figure 2. Board Layout - Sensor Address Location
Figure 3. Board Layout
A
B
INHIbIT FEATURE (A)
Shorting these terminals or closing the circuit inhibits the sensor from taking a measure; regardless of what
method the measurement is requested. The inhibit feature should be used to ensure the weight does not get
buried by material during the filling process of the vessel. Multiple ways to use this contact closure setting;
another device, PLC, or single switch.
MEASURE FEATURE (b)
The Yo-Yo level measuring device also allows the connection of a PLC digital output to request a reading of each
sensor. This is a momentary contact closure. Recommended "start pulse" is 500 milliseconds.
9
LBY180112 Rev. B
Advertisement
Table of Contents
