How To Use Digital Picture Functions "00.0.0 - Sony MDP-800 Operating Instructions Manual

Cd cdv ld player
Hide thumbs Also See for MDP-800:
Table of Contents

Advertisement

How to Use Digital Picture Functions
During Variable Speed Play, Step Play or Freeze Frame, the sound is automatically muted. However, if you use the
player's unique digital picture functions, you can view successive flashing pictures (Flash Motion) or a freeze picture
(Stop Motion) as the normal sound continues. You can also recall a picture stored in the digital memory of the player at
any time, for example, in stop mode, when no disc is loaded, while playing another LD, CD, or CDV (Picture Call).
Locate the FLASH MOTION, STOP MOTION and Picture Call buttons on the Remote Commander.
'a
FLASH
To Flash Pictures
MOTION
Press FLASH MOTION on the Remote.
(Flash Motion) ......................
a
|
The DIGITAL MEMORY indicator on the player
lights up. Still pictures flash in succession at
specified intervals. During this, the sound is
played normally.
To Change the Interval of the
Press Speed Set (-/+) to extend or shorten
Flashing Pictures..................
the interval of the flashing pictures.
Toextend
To shorten
+
To Resume Normal Play...........
a
| Press PLAY (> ).
To switch to the STOP MOTION
mode, press
STOP MOTION.
To See a Freeze Picture with
MOTION
Press STOP MOTION on the Remote.
Sound
(Stop Motion) OUR
ti
O22
|
The DIGITAL MEMORY indicator lights up and
the picture freezes. During this, the sound is
played normally.
The disc continues to be played even while you
see only one still picture. If you press STOP
MOTION again, the picture advances to
correspond with the sound track.
To Resume Normal Play...........
Press PLAY (> ).
To switch to the STOP MOTION mode, press
STOP MOTION.
To Recall a Picture Stored in the Digital Memory (Picture Call)
1 Press PAUSE (11) at the picture you
PAUSE
The DIGITAL MEMORY indicator lights up and
want to store.
Cu y
the picture is stored in the players memory.*
2 You can then play, stop, or replace
the disc.
3 Press PICTURE CALL on the
PICTURE
The picture stored in the memory appears. To
Remote.**
CALL
make the picture disappear, press PICTURE
CALL again.
What Picture is Stored in the Digital Memory?
The player automatically stores the last picture viewed while the DIGITAL MEMORY indicator is lit by such operations as
shown below:
« When you press PAUSE (11)
* Flash Motion, Stop Motion, Intro Scan or Search Play
¢ Scan, Variable Speed, Step Play on a CLV, VSD or video section of CDV disc
¢ When an LD's playing side is automatically changed from side A to B
*
The picture stored in the digital memory is cleared when the player is turned off.
** Picture Call is not operable during Stop Motion or Flash Motion play.
22
To Play a Laser Disc

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdp-a7

Table of Contents