Sony MDP-800 Operating Instructions Manual page 15

7 AUDIO
a Second Audio Program cay Pipeteares AUDIO MONITOR button on the Remote.
This function alternates the sound output on a
(SAP) ED: ofa Me davwneeornn ea aes a | disc that has been recorded with two sound
(Player or Remote) (Remote) tracks, such as bilingual discs.
The procedure below indicates how the output and the display changes with each press.
The active track appears for three seconds on the TV screen. |t always appears in the front panel display.
When you select 1/L (or 2/R), the sound of the left (or right) channel is output from both speakers.
s ? Screen Output Sound
rocedure -
message Stereo Disc SAP Disc
|
Stereo Soundtrack 1 (left channel)
1 Press PLAY (> ).
Nosmessage.
(Both channels)
Soundtrack 2 (right channel)
2 Press AUDIO MONITOR.
VL
Left channel
Soundtrack 1 (left channel)
3 Press AUDIO MONITOR again. 2/R
Right channel
Soundtrack 2 (right channel)
4 Press AUDIO MONITOR again to 1. 2/R Stereo Soundtrack 1 (left channel)
return to stereo status. (Both channels) Soundtrack 2 (right channel)
To Switch From Digital to ANALOG Press the ANALOG/CEM button on the
Analog Sound....................
CWS
Remote to switch the player to analog or
digital sound. Digital affords a better quality
(Remote) sound reproduction. If the LD contains a digital
sound signal, the player automatically sends
that output to the amplifier or receiver. To switch
to analog sound, press the ANALOG/CIN
button on the Remote. "} ANALOG" appears on
screen for three seconds. To return to digital
sound, press the ANALOG/ CRM button until "J
DIGITAL" appears on screen.
With certain discs there may be a difference in
volume.
Discs With a CBM (CX) Label .... ANALOG
Discs bearing the 8M label are recorded with
Cia the CX noise reduction system, which gives
lower noise levels and higher dynamic range on
analog sound. The player detects most
Ci discs and when you switch to analog
sound, it activates the CX noise reduction
system automatically. When playing a CIN disc
which does not contain a code to activate the
CX noise reduction system, press the ANALOG/
CBN button until "CX ON" appears on screen.
The CX noise reduction system will be
activated.
(Remote)
To Play a Laser Disc 15