Configuration Methods - H3C UniServer R4300 G6 User Manual

Configuration methods

Table 1 RAID configuration methods
RAID
configuration
method
Configure RAID from
the BIOS text or
graphical interface
Configure RAID
simultaneously when
the OS is installed
from the iFIST
interface
Configure RAID from
the HDM2 interface.
Configure a template
with RAID settings
and then apply the
template to the
server from the FIST
interface.
Use command lines
or a third-party tool to
configure RAID in the
OS.
Whether
services are Application scenarios
affected
Applicable to all RAID configuration
Yes
scenarios
Applicable to the scenario where
iFIST is used to configure RAID in the
OS installation process for a single
Yes
server.
For the available storage controllers,
see H3C Servers iFIST User Guide.
Applicable to the scenario where
service continuity must be guaranteed
during the RAID configuration
No
process.
For the available storage controllers,
see H3C Servers HDM2 User Guide.
Applicable to the scenario to configure
RAID for multiple servers in batch.
Yes
For the available storage controllers,
see H3C Servers FIST User Guide.
Applicable to the following scenarios
•
Use ARCCONF Command Line
Utility to configure RAID with a
PMC storage controller.
•
Use StorCLI to configure RAID
with an LSI storage controller.
No
•
Use Intel VROC 6.0 PV GUI to
configure RAID with a VROC
module in a Windows operating
system.
•
Use command lines to configure
RAID with a VROC module in a
Linux operating system.
2
Reference
H3C Servers Storage
Controllers User Guide
H3C Servers iFIST
User Guide
H3C Servers HDM2
User Guide
H3C Servers FIST User
Guide
For more information
about common
functions, see H3C
Servers Storage
Controllers User Guide.
For detailed
information, see the tool
user guide from third
parties.