User Manual ARIA 3 Box Contents Type C Aria 3 AUX 3.5mm Carrying Pouch Charging Cable Headphones Audio Cable Product Introduction Product Overview EQ Button ON / OFF / PAIR Switch Status Indicator Indicator Charging Port AUX 3.5mm Jack...
User Manual ARIA 3 Button Functions Headphones Button Functions Switch to the “ON / OFF” position to turn the head- phones on / off PAIR Switch to the “PAIR” position & hold for 2 seconds to enter pairing mode Press once to play / pause Press once to accept / end call Press &...
User Manual ARIA 3 LED Indicators Indicator & Voice Prompt Status Solid red Charging Flashing red, “LOW BATTERY” voice indicator Low battery Blue flash every 2 seconds, “WELCOME TO Power on AVANTREE” voice indicator Solid red for 1 second then off, “GOODBYE”...
User Manual ARIA 3 Charging the Headphones A “LOW BATTERY” voice prompt and a flashing red light indicates low battery. In order to charge, you can use either a 5V/500mA-2A rated USB adapter (your phone charger or similar should work) or PC USB port as a power source.
“Pairing” and see the LED flashing RED & BLUE. Hold for 3s PAIR STEP 2 Turn on your device’s Bluetooth and select “Avantree Aria 3” in the Bluetooth menu. STEP 3 Keep the headphones close to your device and wait for 5-10 seconds or until they connect.
If not, you can manually activate reconnection by sliding the switch to “PAIR” once, PAIR or by selecting “Avantree Aria 3” in your device’s Bluetooth menu. Using with Your PC To connect the headphones to your PC, follow these steps: STEP 1 Turn on the headset.
“PAIR” once or selecting “Avantree” from your device’s Bluetooth menu. Configuring Audio Settings (Only for PC) You may need to configure your audio settings when using the Aria 3 with your PC or laptop. STEP 1 In your device’s audio settings, ensure that “Avantree Aria 3”...
Page 10
INPUT VOLUME APP SETTINGS Settings OUTPUT DEVICE Aria 3 Avantree Voice & Video OUTPUT VOLUME NOTE: On Windows 7 / 8.1 / 10, if you use headphones with PC’s built-in Bluetooth, select “Avantree Aria 3 hands free” as the default instead.