Sony CDP-311 Operating Instructions Manual page 14

Playing ina
Desired Order ;
Recording a Program
You can adjust the total playing time of the
program, so that you can make the program
fit the length of a tape when recording.
Moreover, you can make two different
5 3 2-B1) 1 ,2-B2) programs by inserting a pause for recording
on both side of a tape.
1 Press PROGRAM.
PROGRAM appears in the display.
1 2-A Press the numeric buttons of the
PROGRAM
desired selections in the desired
rri order. See page 13.
2-B To find selections which fit in the
remaining time.
1) Press iaa dad (i€) or >> P»
(PPI) to change a selection and
check the time. - Program edit
2 If satisfactory, go to the next step. If
-A not, choose another selection.
8
ab C) 5
2) Press PROGRAM to store the
selection.
Step number appears in the display
for a while.
Repeat steps 1) and 2} to program
other selections.
The display shows:
2B-1 ) a) The last programmed selection
b) The order to be playe
c) Programmed selection
d) The total playing time
3 Press tl to make a program for side
B.
"B" in the tape indicator flashes and "P^
appears in the display, and the total
playing time is reset to 0. A pause is
also counted as a selection.
B-2)
PROGRAM
4 Program selections for side B by
repeating step 2.
5 Start recording on the cassette deck
and press P».
It is better to start recording on the
cassette deck first to transport the
leader tape before pressing ® on this
unit.
To play the selections for side B
When the selections for side A are played.
the unit enters pause mode. Reverse the
tape, then press P» or Il.
To make a program only for one
side of a tape
Follow the steps on page 13.
Le eee