Sony CDP-311 Operating Instructions Manual page 20

20
EDIT/TIME FADE
Fading Out at the
Desired Time
You can end the play fading out by
designating the play duration. Once the
time fade is set, it functions twice for editing
both sides of a tape. You can change discs
without cancelling this function and use it in
any play mode.
1 Press EDIT/TIME FADE twice in stop
mode, (or press it once in pause
mode).
"TIME FADE" and "A" in the tape
indicator appear in the display.
2 Press numeric buttons, I«« 44 or
>> PPI to set the desired play
duration.
a) When you specify a commercially
available tape length:
Each time you press 4 -<€< or
>> PPI, the play duration for one side
of the tape is displayed as follows
HALF —- C-46— C-54 — C-60
[. 423 00 mar (2700 mum 130 00 mn
--. +- — C-90 — Ed
$00) mmi — (3? 00 m
When you select HALF, the playing
time of each program is set to a half of
the total playing time of the disc.
b) When setting the time for one side of
the tape as you want:
Press the numeric buttons.
Press [10] for "0". It is generally not
necessary to press numeric buttons for
seconds, unless required.
3 Press > to start playing.
Before the unit enters pause mode at
the set time with "B" lit in the tape
indicator. play starts fading out.
To start play for the other side of
the tape
Press > or I8.
The unit enters pause mode at the set time
by fading out for a specified duration.
When this play ends, time fade is cancelled.