Step 5: Frame Assembly - Arrow Storage Products LO1010 Owner's Manual & Assembly Manual

Step 5: Frame Assembly

You will need for this page:
(QTY: 8)
(QTY: 2)
Do NOT fasten your Floor Frames to your Base at this time.
You will anchor your building after it is erected. If using a
Floor Frame Kit, you must wait until after assembly to install it.
1 Assemble Floor Frame with two screws at each
corner as shown. At the front corners insert a bolt
through the bottom of the Frame as shown.
FRONT
Front Corner
Insert a bolt and nut thru bottom of
Front Floor Frame at each front corner
to secure Front Frame to Side Frames.
The Floor Frame must be BOTH square AND
level or the holes will not line up properly.
Do not continue beyond this point unless you have enough time to complete the
shed today. The remainder of assembly may take several hours and requires at
least two people. A partially assembled shed left overnight can be seriously damaged by
even light winds. It is recommended that you wait and complete the remainder of shed
assembly on a day which you have plenty of time to fi nish the shed safely and completely.
Assemblies from Step 1:
• Front Floor Assembly (1)
• Side Floor Assembly (2)
• Rear Floor Assembly (1)
Back Corner
21
When diagonal measurements
are equal, the Frame is square.
21A