Advertisement
Quick Links
Assembly Instructions
Components (Label - Description)
1 - Bottom panel
2 - Bottom cover
3 - Drawer support
4 - Back panel
5 - Left side panel
6 - Right side panel
7 - Top panel
8 - Shelf
Augusta Styling Station
Model #3327
9 - Drawer back
10 - Drawer front
11 - Drawer left side
12 - Drawer right side
13 - Drawer bottom
14 - Left door
15 - Right door
PARTS LIST**
Qty.
Description
Part
Large cam lock set
A
24
B
23
Wooden dowel
C
34
Small screws
Drawer glides
D
2
E
4
Small cam lock set
Large screws
F
4
G
1
Drawer lock
H
4
Medium screws
I
1
Drawer lock catch
J
2
Door handles
K
1
Drawer handle
L
4
Handle screws
Door hinges
M
4
Shelf support pegs
N
4
Phillips-head screwdriver required (not included)
**Check inside all boxes and drawers for boxes/bags
of hardware before beginning assembly.
Screw the cam lock screw
into the first panel.
Using a
cam lock
Sketch
Slide second panel over
Slide cam lock over head of
cam lock screw.
screw, then turn to
tighten.
Advertisement
Related Manuals for Minerva Augusta Styling Station 3327
Summary of Contents for Minerva Augusta Styling Station 3327
- Page 1 PARTS LIST** Assembly Instructions Qty. Description Part Sketch Large cam lock set Wooden dowel Small screws Drawer glides Small cam lock set Large screws Drawer lock Medium screws Drawer lock catch Door handles Drawer handle Augusta Styling Station Handle screws Model #3327 Door hinges Components (Label - Description)
- Page 2 1.1 - Mounting hinges (1 of 3) 1.2 - Mounting hinges (2 of 3) 1) Hold the doors (14 and15) perpendicular to their respective side panel such that the hinges are 1) Fit the "bowl" of the hinges (K) inside the notches cut into the doors (14 and 15), flat against the side panel.
- Page 3 4 - Mounting inner drawer glides 5 - Mounting drawer lock catch 1) Locate both drawer sides (11 and 12) and the inner drawer glides (D). 1) Center the drawer lock catch (I) underneath the top panel (7) such that the front edge of the catch is exactly 7/8"...
- Page 4 8 - Mounting the right side panel 9 - Mounting the left side panel 1) Lay the right side panel (6) down on the ground, and insert 7 cam lock screws (A) and 8 dowels (B) as shown. 2) Set the assembly from Step 7 onto the right side panel (6) and secure with 5 cam locks (A).
- Page 5 11 - Assembling the drawer 10 - Mounting the top panel H (x4) 1) Screw lock (G) into drawer face (14) using the 4 medium screws (H), then place the cap on from the front. 2) Screw the handle (K) on to drawer face (14) using 2 handle screws (L). 3) Screw 4 small cam lock screws (E) into back of drawer face (14).
Need help?
Do you have a question about the Augusta Styling Station 3327 and is the answer not in the manual?
Questions and answers