Minerva 3398ss-m-SHL Assembly Instructions

Genesis ultra double-sided styling station

Download this manual

Assembly Instructions

Genesis Ultra Double-sided Styling Station

Model #3398ss-m-SHL

PARTS LIST**

Part

Qty.

Description

Short Allen bolts

Medium Allen bolts

Long Allen bolts

Flat-top Allen bolts

Short bolt anchors

Handle screws

Appliance rings

**Open all drawers and

boxes to check for

parts before

beginning assembly.

Components (Label - Description)

1 - Base

2 - Bottom cabinet section

3 - Top cabinet section

S ketch

Washers

Handles

Tools required:

Large Allen wrench (included)

Sm all Allen wrench (Included)

Phillips-head screwdriver (Not included)

4 - Mirror panel

5 - Rear panel

Need help?

Do you have a question about the 3398ss-m-SHL and is the answer not in the manual?

Page 1 Sm all Allen wrench (Included) beginning assembly. Phillips-head screwdriver (Not included) Components (Label - Description) Genesis Ultra Double-sided Styling Station 1 - Base 4 - Mirror panel Model #3398ss-m-SHL 2 - Bottom cabinet section 5 - Rear panel 3 - Top cabinet section...
Page 2 1 - Mounting bottom cabinet section 2 - Mounting the top cabinet section 1) Remove all the drawers from the bottom cabinet 1) Remove all the drawers from the top cabinet section (3) by pressing the black release tabs in the section (2) by pressing the black release tabs in glides (one up, one down) and pulling.
Page 3 4 - Mounting the mirror and back panels 5 - Replacing the drawers 1) For shipping, the drawer handles (J) are attached to the insides of the drawer faces. Using a 1) Rotate the mirror panel (4) such that the holes in the back of the panel are aligned with the holes Phillips-head screwdriver, remove the 2 screws (K) in each and reattach the handles on the in the front faces of the bottom and top cabinet sections (2, 3).