Minerva AV-6010 Assembly Instructions

Assembly Instructions
Noble All
Purpose Chair
SKU: AV-6010
PARTS LIST*
Part Qty.
A 1
B 1
C 1
D 1
Base and hydraulic
E 1
F 8
Bolt + washer + lock washer
G 1
H 1
Description
Chair top
Headrest
Seat cushion
Footrest bar
Bolt
Bracket
! ALWAYS KEEP HYDRAULIC BASE UPRIGHT. THE HYDRAULIC
SHOULD NOT BE STORED OR TURNED UPSIDE-DOWN !
1
The bracket must be bolted to the hydraulic before the chair can be safely
attached. The bracket may already come bolted on the hydraulic, but if not,
it must be removed from the chair by removing the four bolts.
Now remove the bolt from the piston, place the bracket on the piston,
and screw the bolt back into the piston through the bracket.
Remove bracket if it's on chair bottom.
2
Attach the footrest to the chair
front using the four remaining
bolts and lock washers.
Attach bracket to piston.
bolt
bracket
3
Seat cushion and
headrest are removable.
May need to be placed
into locations as shown
once all steps of assembly
are complete.
Then attach seat to the assembled
bracket and hydraulic.