KERN EWJ Operating Instructions Manual page 54



2. Start tolerance check:
 Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified to-
lerance
The entered values will remain valid until new values are entered.
To delete the values, select menu setting < limits >  < clear >
and confirm on [  ] button.
54
 Use the navigation keys  to select setting < limlow
>.
 Press [  ] button to confirm, the numeric input window
for entering the lower limit value will appear. The active
digit is flashing.
 Enter lower limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limlow> menu.
 Press repeatedly  button to exit menu.
Finished the setting works, the weighing balance will be
ready for checkweighing.
Load within specified to-
lerance
Load exceeds specified
tolerance
TEWJ-B-BA-e-2310