Lens Block; Ornamental Ring A Or Barrier Block Assy Replacing Method - Sony DSC-RX100M6 Service Manual

2018/06/16 03:29:19 (GMT+09:00)
4-3.

Lens Block

4-3-1.

Ornamental Ring A or Barrier Block Assy Replacing Method

Removal
1. Turn on the power switch and extend the lens (TELE end).
2. Detach the battery.
3. Apply alcohol to the gap of the Ornamental Plate using tweezers or fine-tipped stick as shown below.
4. Detach the Ornamental Ring A.
Note:
Do not turn the Ornamental Ring A because there are
Positioning Bosses. Detach the Ornamental Ring A in
the arrow direction.
5. Disengage the four claws and remove the Barrier Block Assy.
Barrier Block Assy
Claws
DSC-RX100M6
Tweezers
Solvent
Claws
Note:
Ornamental Ring Aは， 位置決めのボスがあるため，
左右にひねらず矢印方向に取り外してください。
Bosses
Sony CONFIDENTIAL
For Authorized Servicer
Ornamental Ring A
4-26
SYS SET