Yolink M2 Installation & User Manual page 7

C-2. Add Device
Ta p " " b u o n , t h e n s c a n Q R
1
C o d e o n t h e d e v i c e . F o l l o w t h e
s t e p s t o a d d t h e d e v i c e
Install four AA non-rechargeable
2
ba eries a er installa on. The
" " Bu on LED will blink green
s e ve ra l m e s , i n d i ca n g yo u r
device has connected to the cloud
and is ready to use
1. You will need to press the SET bu on once a er installing four AA ba eries or re-install the AA
ba eries if the device failed to connect to the cloud
2. If the green LED does not blink as noted this may indicate a problem with the smart lock. Please
see the troubleshoo ng sec on and the contact sec on for technical support
5