E. Using the YoLink Smart Lock M2
E-1 Set the Local Password
Each YoLink Smart Lock M2 support only one local password. You will need to set the local
password physically
1. Local password is default set to: 12345678. For your home security, please set a new local password
right now a er installa on
2. When se ng the local password, keep the door open
3. If you have forgo en the password just follow the above steps to set a new local password, and the old
one will be invalid
Press the "S" bu on once
1
on the back module
Enter a 4-8 digits on the front module followed
2
by the "
" bu on
2 Beeps = Success
3 Beeps = Try again
0 Beep = Go to troubleshoo ng
14
Need help?
Do you have a question about the M2 and is the answer not in the manual?