Introduction Of Audio Adjustments; Using The Btb (Bass Treble Booster); Using Balance Adjustment - Pioneer SUPER TUNER KEH-P2030 Operation Manual

(~A_u_d_io_A_d_ju_s_t_m_e_n_t_s -~)
Introduction of audio
adjustments
CD
BTB indicator
Shows when the BTB other than
FLAT is
se-
lected.
®
Audio display
Shows the audio adjustments status.
@ LOUD indicator
Appears in the display when loudness is
turned on.
• Press AUDIO to display the audio func-
tion names.
Press AUDIO
repeatedly to switch between
the following audio functions:
FAD (balance adjustment)-BAS (bass adjust-
ment)-TRE (treble adjustment)-LOUD
(loudness)-SLA (source level adjustment)
• When selecting the FM tuner as the source,
you cannot switch to SLA.
• To return to the display of each source, press
BAND.
~~Note
If you do not operate the aud io function with in
about 30 seconds, the display is automatically re-
turned to the sou rce display.
0
Using balance adjustment
You can select a fader/ balan ce setting that
provides an ideal listening environment in all
occupied seats.
~---------------
Section
•
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
• If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press VOLUME up/+ or down/- to ad-
just front/rear speaker balance.
Each press of VOLUME up/+ or dow n/-
moves the front/rear speaker balance towards
the front or the rear.
FAD F15- FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
• FAD 0 is the proper setting when only two
speakers are used.
3 Press ...,.. or ..,.. to adjust left/right speaker
balance.
When you press
<IIIII
or..,., BAL 0 is disp layed.
Each press of...,.. or..,.. moves the left/right
speaker balance towards the left or the right.
BALL 9- BAL R 9
is displayed as the left/right
speaker balance moves from left to right. [!)
Using the BTB (bass treble
booster)
There are five stored BTB settings such as
DYNAMIC, POWER, MAX, CUSTOM and
FLAT
that can easily recall at any time.
• CUSTOM is an adjusted BTB setting that
you create.
• When FLAT is selected no supplement or
co rrecti on is made to the sound . Thi s is
useful to check effect of the BTB settings
by switching alternatively between FLAT
and set BTB setting.
• Press BTB to select the desired BTB set-
ting.
Press BTB repeatedly to switch between the
following BTB setting:
MAX- CUSTOM- FLAT - DYNAMIC-
POWER
m
~
cc
(/)
::r
En
CID