Page 1
Original SQ153700 EN - Assembly Instruction and User Manual (Page 2) US - Assembly Instruction and User Manual (Page 9) DE - Montageanleitung (Seite 16)
TABLE OF CONTENTS 1. Safety and warnings 2. Usage IMPORTANT NOTES! 3. Set up and installation Prior to installment, use and 4. Operation maintenance of the table frame, any 5. Maintenance and defects installer and any user of the table must study this assembly and operation 6.
• the sit and stand table may not be used until it has been assembled and installed according to the instructions. Manufacturer ConSet A/S | Industrivej 23 | 6900 Skjern | Denmark www.conset.com | Tlf.: +45 96800080 | conset@conset.com...
7. Parts Center travers Side travers Center tube Non-motor leg tube Motor leg tube Motor leg Non-motor leg Tabletop bracket L Tabletop bracket R Foot M5x8mm M5x8mm Glide M6x20 Screw 5x16mm Screw 3x16mm Power supply Power supply bracket Power cord Control panel Wirenail...
Page 5
8. Assembly Instruction and User Manual Adjusting travers Adjusting carrier tube...
Page 6
Mounting of topbrackets Attach top bracket marked “R” to the non-motor leg. Attach top bracket marked “L” to the motor Leg. Mounting of Non-motor leg...
TABLE OF CONTENTS 1. Safety and warnings 2. Usage IMPORTANT NOTES! 3. Set up and installation Prior to installment, use and 4. Operation maintenance of the table frame, any 5. Maintenance and defects installer and any user of the table must study this assembly and operation 6.
• the sit and stand table may not be used until it has been assembled and installed according to the instructions. Manufacturer ConSet A/S | Industrivej 23 | 6900 Skjern | Denmark www.conset.com | Tlf.: +45 96800080 | conset@conset.com...
Page 11
7. Parts Center travers Side travers Center tube Non-motor leg tube Motor leg tube Motor leg Non-motor leg Tabletop bracket L Tabletop bracket R Foot M5x8mm M5x8mm Glide M6x20 Screw 5x16mm Screw 3x16mm Power supply Power supply bracket Power cord Control panel Wirenail...
Page 12
8. Assembly Instruction and User Manual Adjusting travers Adjusting carrier tube...
Page 13
Mounting of topbrackets Attach top bracket marked “R” to the non-motor leg. Attach top bracket marked “L” to the motor Leg. Mounting of Non-motor leg...
INHALTSVERZEICHNIS 1. SICHERHEIT UND WICHTIGE HINWEISE 2. VERWENDUNGSRICHTLINIEN WICHTIGE INFORMATIONEN ! 3. AUFBAU UND INSTALLATION 4. BEDIENUNG Es ist absolut notwendig diese Gebrauchs- und Montageanleitung VOR 5. WARTUNG, REINIGUNG UND MÄNGEL dem Aufbau, der Installationund der 6. TECHNISCHE DATEN Benutzung des Tisches zu lesen. So schützen Sie sich selbst und das Produkt.
Steh-Sitztische als eine Maschine betrachtet werden und • Steh-Sitztische nicht verwendet werden dürfen, bevor er nach den Vorschriften dieser Gebrauchs / Montageanleitung komplett zusammengebaut und installiert wurde. Hersteller ConSet A/S | Industrivej 23 | 6900 Skjern | Denmark www.conset.com | Tlf.: +45 96800080 | conset@conset.com...
Page 18
7. Bauteile Center travers Side travers Center tube Non-motor leg tube Motor leg tube Motor leg Non-motor leg Tabletop bracket L Tabletop bracket R Fuss M5x8mm M5x8mm Glide M6x20 Screw 5x16mm Screw 3x16mm Netzteil Power supply bracket Netzkabel Bedienelement Drahtstift...
Need help?
Do you have a question about the SQ153700 and is the answer not in the manual?
Questions and answers