Spout Installation - Kohler K-108 Installation Manual

Dished
Washer
Washer

1. Spout Installation

Apply a bead of plumbers putty or other sealant to the underside
of the spout or putty ring (if supplied) according to the putty
manufacturer's instructions.
Locate the center hole and insert the spout.
Slide the metal washer and nut onto the spout shank.
Securely tighten the nut with a wrench. Do not overtighten.
NOTE: For a thin-walled lavatory (such as stainless steel), slide the
dished washer, the washer, and the nut onto the spout shank.
Securely tighten the nut with a wrench. Do not overtighten. It may
be necessary to remove the nut from the top of the spout shank to
ensure proper installation.
Remove any excess putty or sealant.
Kohler Co.
Apply
Plumbers
Putty
Washer
Nut
Nut
3 1010441-2-B