Samsung DVD-V2500 Instruction Manual page 57

Basic Recording
You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in 30-minute
increments up to 4 hours by pressing the REC button repeatedly;
see page 49.
NOTE: Be sure you videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a smafl piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
Before You Begin...
• Power on the DVD-VCR
• Power on the TV
• Set the TV to channel 3 or 4.
1 Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire program.
To change the Recording Speed, see page 49.
2
3
Select a Channel to Record
Use the 0-9 buttons or the Channel Up/Down arrow battens to
select the desired channel, or press the INPUT SEL button to
select Line 1 or 2 if recording from an external device connected to
the front or rear Line inputs, respectively.
Start Recording
Press the REC button on the remote control or front panel.
For options while recording is in progress, see "Special Recording
Features" on the next page.
Recording from the DVD player to the VCR is not
possible,