Samsung DVD-V2500 Instruction Manual page 55

Auto Play
If you want your videotapes to play automatically when you insert
them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety Tab will
play automatically when inserted.
1 Open the "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "VCR Setup"
Using the up/down and left/right buttons, move the selection arrow
to "VCR Setup," then press ENTER to select.
3 Select "Auto Play"
Move the selection arrow to "Auto Play," then press right to select
from the following options:
• On - The VCR will automatically begin playing a video tape
when it is inserted, as long as the safety tab of the cassette
has been removed.
• Off- Auto play is disabled.
• Recerd Safety Tab
4 Tape Length
Press the left button to select the video cassette length.
This information is usually printed on the tape box. The menu
cycles through: T120, T160 or T180. Once the type of cassette is
set, the VCR can display the amount of time remaining on the tape
when you press the DISPLAY button.
5 Auto Repeat
In the VCR Setup "Auto Repeat" sets the VCR to play a tape
repeatedly [unless a tape control is activated (stop, fast forward or
rewind)].
S-VHS Playback
The DVD.VCR aflows you to playback high quality S.VHS tapes.
1
2
Insert a S-VHS Tape
Insert an S_VHStape into the VCR deck.
Start Playback
Press Play/Pause on the remote control to begin playback of the
S-VHS tape.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ..........................................................
i i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii