Samsung DVD-V2500 Instruction Manual page 12

Using the TV Buttons on the Remote Control 1
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your teIevision is compatible, follow the instructions
below
1 Switch your television on.
2 Point the remote control towards the teIevision.
3 Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01, 14, 15, 23 LOEWE 28
SHARP 02, 16, 22 ZENITH 17
SONY 03 LG 06, 08, 18
RCA 07, 29 MAGNAVOX 04
TOSHIBA 09 EMERSON 21
PANASONIC 12, 24 SANYO 05, 20
JVC 11 DAEWOO 19
HITACHI 10 NOBLEX 25
MITSUBISHI !3 TELEFUNKEN 26
NEWSAN 27
Result: If your television is compatible with the remote control, it
will switch off. it is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
(_" When you change the batteries in the remote control, you
must _p_ogram the code, following the same procedure
You can then control the television using the foIIowing buttons.
Button Function
POWER (_) Used to switchthe television on and off.
iNPUT SEE (_) Used to select an external source.
VOL + or- (_) Used to adjust the volume of the television.
OH (• or T) (_ Used to select the required channel.
MUTE (_) Used to toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television direct]y.