Samsung DVD-V2500 Instruction Manual page 20

Auto Channel Memory 1
Auto Channel Memory will automatically seek and store all active
channels in your area.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "VCR Setup"
Using the up and down buttons, move the selection cursor to
"VCR Setup," then press ENTER to select.
3 Select "Channel"
Using the up and down buttons, move the selection cursor to
"Channel", then press ENTER to select.
4 Run "Auto channel memory"
Move the selection arrow to "Auto channel memory," then press
ENTER to select.
• The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete.
• When finished, the lowest channel found will be displayed.