Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Spindle Thread
Pad/Disc Size
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
Air Smart Eraser (Low Noise)
ST-P6634S
2,600 r/min
5/16"-24
3-1/2" (89mm)
10 CFM (283 L/min)
8.8" (225 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
1.8 lbs (0.83 kg)
PNEUMATIC TOOLS
Noise and Vibration:
Vibration
EN ISO 28927-3
No-Load:
0.6 m/s²
Uncertainty
K= 1.5 m/s
Noise
EN ISO 15744
Sound Pressure Level
load: 81 dB(A)
Sound power level
load: 92 dB(A)
Uncertainty
²
K= 3dB
ST-P6634S-S-1901C-STF
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake ST-P6634S
Summary of Contents for Sumake ST-P6634S
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! ² K= 1.5 m/s K= 3dB Net Weight 1.8 lbs (0.83 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-P6634S-S-1901C-STF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment：AIR SMART ERASER (LOW NOISE) Model/ Serial No.：ST-P6634S to which this declaration applies, complies with these normative documents: ...
- Page 3 Sumake is a manufacturer and exporter of air the tool. Use a 3 HP or larger compressor for each 2. It is forbidden to use this tool in explosive tools since established.
- Page 4 ST-P6634S AIR SMART ERASER (LOW NOISE) PARTS LIST Parts No Parts No. Description Description Q'ty Q ty Parts No Parts No. Description Description Q'ty Q ty P6634S-08 O-Ring (3.5x1.4) P6634S-30 Gear Plate P6634S-09A Air Inlet (PT19) P6634S-31 Bearing (6200ZZ) P6634S-09B...
- Page 5 ERASER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 5. Release the start and stop device in the case of an interruption of the energy supply. 6. Use only lubricants recommended by the manufacturer. 7. Personal protective safety glasses shall be used, suitable gloves and protective clothing are recommended 8.
- Page 8 Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the power tool. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the ST-P6634S and is the answer not in the manual?
Questions and answers