Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-TAIS030 Series
Summary of Contents for Sumake ST-TAIS030 Series
- Page 1 INSTRUCTION MANUAL ST-TAIS030(50)(70) series ITEM NO.: FOLDED TORQUE REACTION ARM ST-TAIS030(50)(70)-I-2309F-YM...
-
Page 2: Table Of Contents
Table of contents Feature････････････････････････････････････････ Specification････････････････････････････････････ Items Inspection･････････････････････････････････ III. Safety Precautions ･･･････････････････････････････ Warning ･･････････････････････････････ Safety information ･･････････････････････････････ Description･････････････････････････････････････ 1. Assembly ････････････････････････････････ 2. Dimension ･･････････････････････････････････ 3. Working environment ･･･････････････････････････ Installation ･････････････････････････････････････ 1. Installation instruction ･･････････････････････････ 2. Spring tension adjustment ････････････････････････ Maintenance ･･･････････････････････････････････ VII. -
Page 3: Feature
Feature This torque reaction arm is applicable to absorb the reaction from electric/pneumatic screwdriver directly after working. To prevented injury for operator after working continuously. II. Specification The spindle can swivel 360° and front arm can swivel around 330° for horizontal and the vertical height can make electric/pneumatic screwdriver to the specific position. -
Page 4: Items Inspection
III. Item Inspection ➢ Comparison Description Q’TY Remark Base plate 1set Linear bearing set 1set Hanger set 1set Arm set 1set Accessories bag 2pack Screw x4 pcs, set screw x2set 6mmm allen key x 1pcs, plug x1pcs... -
Page 5: Safety Precautions
IV. Safety Precautions For the proper use of this product, avoid jeopardizing personal and property safety of the lives of others, to prevent the occurrence of danger and be sure to read the instructions carefully ＜Please be sure to follow instruction ＞ Warning：... -
Page 6: Description
Description 1. Assembly： Please follow the steps below to assemble the five major parts (as shown in the pictures):... - Page 8 (A). Take 4PCS M6*25 screw (#15) from the (05) accessories bag to install the base (01) on a stable work table. See FIG.1 (B). Insert the spindle linear bearing set (02) into the base (01) until the bottom end touches the table.
-
Page 9: Dimension
2. Dimension： Model：ST-TAIS030... -
Page 10: Working Environment
Model：ST-TAIS050, ST-TAIS070 3. Working environment： Area indoor Max. torque Approx. 6.3 kg / 6 ㎏ ST-TAIS030 150 kgf-cm (14.7Nm) ST-TAIS050 Approx.9.2 kg / 8.9 kg 250 kgf-cm (24.5Nm) Weight ST-TAIS070 Approx.9.2 kg / 8.9 kg 250 kgf-cm (24.5Nm) Air pressure 5 ~ 6kg/cm²... -
Page 11: Installation
VI. Installation 1. Installation Instruction： Electric Tool: Please install the tool and tighter front fixture with screws. See FIG. 2 Air Tool: Please install the tool and aim to 1/4” joint then tighten clockwise. See FIG. 3 NOTE: If the clamping OD is less than Φ25, then please install the tool with additional fixture. -
Page 12: Spring Tension Adjustment
2. Spring tension adjustment... -
Page 13: Maintenance
VII. Maintenance To make sure the component of Torque Reaction Arm is durable, please clean and lubricate it regularly. 1. Daily maintenance: Please clean and wipe the dirty surface of component frequently and friction parts (each sliding spindle), Using by protective oil (WD-40 or similar product) to cleaning and lubrication. - Page 14 ST-TAIS030SD FOLDED TORQUE REACTION ARM (FOR AIR & ELECTRIC TOOL) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty YMTA300-003 Screw YMNT1/2 YMNT080 YMBG034 Bearing YMTA300-002 Hanger YMSWR2076 Hex Screw YMSWR2005 Screw YMJOPQ063 Multi Joint YMTR350-005 Linear Bearing YMTR350-028 Front Arm YMTA300-005 Spindle...
- Page 15 ST-TAIS050SD FOLDED TORQUE REACTION ARM (FOR AIR & ELECTRIC TOOL) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty YMTA300-003 Screw YMBG034 Bearing YMNT080 YMSWR2076 Screw YMTA300-002 Hanger YMJOPQ063 Multi Joint YMSWR2005 Screw YMTR650-028 Front Arm YMTR650-005 Bearing YMSWR2085 Screw YMTA600-006 Spindle...
- Page 16 ST-TAIS070SD FOLDED TORQUE REACTION ARM (FOR AIR & ELECTRIC TOOL) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty YMTA300-003 Screw YMBG034 Bearing YMNT080 YMSWR2076 Screw YMTA300-002 Hanger YMJOPQ063 Multi Joint YMSWR2005 Screw YMTR650-028 Front Arm YMTR650-005 Bearing YMSWR2085 Screw YMTA600-006 Spindle...
- Page 17 Operation Manual SA-22030, SA-22050, SA-22070 Read this manual before use Always attached a secondary support Do not fasten the hanger cable or chain. Turn CW. ( For increasing the When the spring spring tension by breaks, the sage pin allen key. pops out from the spring case and collides with one of...
- Page 18 Prohibition Caution Incorrect use of the spring balancer could cause personal injury. Observe instruction in the manual and use the balancer correctly. Never stand under the spring balancer. Prohibition of disassembly. Never put the spring balancer in fluid.
- Page 19 Don’t twist and rub the cordage with cable during travel. Don’t load over its capacity. 1. Take the tools off while remove the spring balancer, prevent the devise drop down. 2. Please remove the spring balancer and tools if rest for a long time. 3.
- Page 20 Leave some slack in the secondary support cable or chain to allow the balancer to rotate freely. The slack must be a suitable length so that the balancer will stop within 10cm when falling in case of failure of the hanger or the fitting.
- Page 21 Model Capacity Weight Travel 1.5 – 3.0 kg SA-22030 1.73 kg 1.3 m 3.0 – 5.0 kg SA-22050 1.82 kg 1.3 m 5.0 – 7.0 kg SA-22070 1.85 kg 1.3 m 1. Installation (1) Attached the spring balancer to the steady place. (2) Please attached a secondary support cable and install to the steady position.
- Page 22 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： SPRING BALANCER Model/ Serial No.： SA-22030(22050)(22070) to which this declaration applies, complies with these normative documents: ...
- Page 23 SA-22030 SPRING BALANCER (1.5-3KG) SA-22050 SPRING BALANCER (3-5KG) SA-22070 SPRING BALANCER (5.0-7.0KGS) PARTS LIST Parts No. Description Q'ty SA22030-01 Spindle SA22030-02 Screw SA22030-03 Ratchet SA22030-03A Ratchet Spring 4~10 SA22030-09AS Casing Set [Incl. 4, 5, 6, 7, 8, 9A, 10] SA22030-13S Spring Plate Set [Incl.
- Page 24 NOTE www.SUMAKE.com www.AIRCOMPRESSOR.com.tw...
Need help?
Do you have a question about the ST-TAIS030 Series and is the answer not in the manual?
Questions and answers