Advertisement
Important instructions
GB
When planning and erecting electrical systems the
relevant standards and regulations applicable in
the country where the equipment is set up and
operated must be duly observed.
Work on the 230V mains system and EIB bus must
exclusively be performed by trained electrical
personnel. Laying and connection of the bus line as
well as application devices must be in conformity
with applicable guidelines specified in the EIB Manu-
al of the European Installation Bus Association (EIBA).
Never open the device for repairs or adjustments.
Please observe the „Mounting Instructions" with
regard to type of mounting and materials required.
If insulated wires of low-voltage leads (eg. bus lines)
and 230-V lines cross or approach each other, a
minimum clearance of 4 mm has to be arranged for
(see manual of Facility System T echnology of ZVEI/
ZVEH).
Make sure environmental conditions are adhered to
as called for by safety class and with respect to the
admissible operating temperature (see "Technical
Data").
The devices are to be programmed using ETS2
(version 1.1 or higher)
Advertisement
