Advertisement
3. CASSETTE PRECAUTIONS AND CARE
I
1 Tape slack can lead to operating difficulties
Remove tape slack before inserting a cas¬
sette. particularly when using C-90 or prere¬
corded cassettes.
2 Use C-30 to C-90 cassettes. Avoid using
C-120 or longer cassettes (The very thin tape
may stretch or break).
3. Clean the head periodically with a good com¬
mercial head cleaner
Avoid touching the
head with magnetic or hard objects
4 Do not oil the cassette mechanism
5. Always remove the cassette from the mecha¬
nism when not in use Exposure to direct sun¬
light, extreme temperatures or high humidity
may damage cassettes
6. The cassette tape will automatically eiect
from the mechanism if it is damaged Always
ensure that cassette tapes are in good condi¬
tion prior to use
4. DCP (Detachable Control Panel)
■ RAX331D Only
The control panel can be detached to prevent
theft When detaching the control panel, store it
in the optional DCP case to prevent scratches.
We recommend taking the detachable control
panel with you when leaving the car
Removing the DCP
1. Turn off the power
2. Press the DCP Release button Qj-
* The DCP is unlocked
3. Remove the DCP
Attaching the DCP
Insert the DCP into the light side of the source
unit and press the left side to lock it.
A CAUTION
Do not Insert the DCP from the left side. Doing so
may damage it.
Storing the DCP in the DCP Case
Hold the DCP. in the orientation as shown in the
figure below, and put it into the DCP case (avail¬
able separately). (Ensure the DCP is in the cor¬
rect orientation.)
[
~
A CAUTION
]
• The DCP can easily be damaged by shocks. After
removing it place it in a protective case and be
careful not to drop it or subject it to strong
shocks.
■ When the release button is pressed and the DCP
is unlocked, the car's vibrations may cause it to
faU. To prevent damage to the DCP. always store It
In a protective case after detaching it
. The rear connector that connects the source unit
and the DCP is an extremely Important pert Be
careful not to damage it by pressing on It with fin¬
gernails. pens, screwdrivers, etc.
Note:
•
n the DCP is dirty, wipe oft with a soft, dry doth only
5. BUTTON TERMINOLOGY
Note:
•
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold)
0
0
0
HI
0
m
8
®
d
B3
m
DCP Release Button (RAX331D only)
Eject
(±)
Button [S9]
REW
(
44
)
Button
[
99
]
FF (►►) Button [ ft® ]
PROG (Program) Button [M]
POWER Button
FUNC (Function) Button
A-M (Audio Mode) Button
LOUD (Loudness) Button
Up and Down ( ▲ and ▼) Buttons
Left and Right (
<A
and
) Buttons
Function Button 1 (]
Function Button
2[*g\
BAND (Tuning Mode) Button [ *|f ]
03) PS/AS (Preset Station Scan/Automatic Station Store) Button (]
0 SCN (Intro Music Scan) Button [©J
§5j RPT (Repeat Play) Button
(G>)
06) Disc Up (D-UP) Button [ ©)
53 DISP (Display Selector) Button
08) Play/Pause (►/») Button [©]
09) Disc Down (D-DOWN) Button [ © ]
)2Dj Preset Buttons (If ]
(*jf J : In the Radio Mode
[£9] : In the Tape Mode
[©] : In the CD Changer Mode
c
Advertisement
