Table of Contents
Advertisement
20
en | General installation procedures
III
Figure 4.7: Tabletop use - under the table
For tabletop mounting:
1.
2.
3.
2024.01 | V03 | F.01U.402.247
Stick the supplied rubber feet in the corners of the device bottom surface for more
stability with this type of installation (F).
For the correct position, refer to the Quick installation guide of the product.
Align the short rack ears with the side screws of the amplifier (C). Unscrew the existent
screws, attach the rack ear and screw them back in (1).
Secure the device by screwing the rack ears to the table as shown in the illustration
(2).
F
C
x2 2
Installation manual
SYNSONA amplifiers
1
Bosch Security Systems B.V.
Advertisement
Table of Contents
