Safety Instructions - yuna CALOR EBK2 G Instruction Manual

WARNING!
indicates a hazardous situation which, if ignored, could result in death or serious injury.
CAUTION!
indicates a hazardous situation which, if not avoided, may result in minor or moderate
NOTICE!
indicates possible damage to the appliance.
DANGER!
1. Non-compliance of the orders of this instruction manual will endanger the life and
health of the operator and / or can result in damages to the appliance.
2. The appliance must be connected to the mains by a qualified professional, who is
familiar with and adheres to the local requirements and supplementary regulations
of your energy supplier.
3. All electrical work must be carried out by a qualified professional. Do not modify
the energy supply. The connection must be carried out in accordance with the
current local and legal regulations
4. Do not connect the appliance to the mains if the appliance itself or the power cord
or the plug are visibly damaged. RISK OF ELECTRICAL SHOCK!
5. Never try to repair the appliance yourself. Repairs carried out by unauthorized per-
sons can cause serious damage. If the appliance does not operate properly,
please contact the customer service. Original spare parts should be used only.
6. When the power cord is damaged, it must be replaced by the manufacturer or an
authorized aftersales service or a qualified professional only.
7. Never touch power plugs, power switches or other electrical components with wet
or damp hands. RISK OF ELECTRIC SHOCK!
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons
1. Operate the appliance with 220 ~ 240 V AC / 50 Hz only.
2. Disconnect the appliance from the mains before you clean or maintain it.
3. The technical data of your energy supply must meet the data on the rating label.
The main current circuit must be equipped with a safety shut-down device.
4. The appliance must always be grounded and protected corresponding to the
injury.

1.3 Safety instructions

To reduce the risk of electrocution
4