CAUTION!
Cooking utensils may become hot because of the heat transferred by the heated food.
Potholders or oven gloves may be needed to handle such utensils.
When the power is on, a beep sounds once; all indicators show "
appliance has entered the stand-by mode.
1. Touch the O
2. All indicators display
3. Place a cookware on the desired cooking zone. Al-
ways keep the bottom of the cookware as well as
the cooking zone clean and dry.
4. Select a cooking zone using the sensors for the
TION OF THE COOKING ZONES
sensor flashes for 5 seconds.
5. Set the power level using the + and - sensor.
Each cooking zone is equipped with 9 power levels (1
6. When you do not set a power level within 1 minute, the appliance will switch off
automatically. You have to start at step 1 again.
7. You can vary the power level at any time during cooking.
/ O
N
FF SENSOR
; the indicator next to the
- 9)
SELEC-
1 - 9
". Now the
18