yuna CALOR EBK2 G Instruction Manual page 22

A
UTOMATIC SWITCH
1. Touch the
SELECTION OF COOKING ZONE
2. Touch the sensor button of the
3. The
INDICATOR OF THE TIMER
4. Set the desired minutes using the + and - sensor.
➢ Touch + or - once to increase / decrease the value by 1
5. Touch the sensor button of the
to represent tens digit will flash.
6. Set he desired dozens of minutes using the + and - sensor.
➢ Touch + or - once to increase / decrease the value by 1
7. When you have finished the setting, the count-down of the
set time starts. The display indicates the remaining time.
8. To indicate which cooking zone (upper / lower cooking
zone) has been enabled a red dot next to the
-
OFF FUNCTION OF ONE COOKING ZONE
-sensor you want to con-
trol via the timer.
will show in the timer display 00 and
single digit 0 flashes.
minute.
again, then the number
TIMER
minute.
goes on.
THE TIMER
.
TIMER
INDICATOR OF
:
or
21