Replacing The Common Motor Terminal Cubicle Fan; Fan Attached To The Cabinet Door; Roof Fan (With Options +C128 And +H353) - ABB ACS880-07 Hardware Manual

192 Maintenance

Replacing the common motor terminal cubicle fan

￭
WARNING!
Use the required personal protective equipment. Wear protective gloves and
long sleeves. Some parts have sharp edges.

Fan attached to the cabinet door

1. Stop the drive and do the steps in section
before you start the work.
2. Open the cabinet door.
3. Disconnect the fan wiring.
4. Remove the connectors.
5. Remove the fastening screws.
6. Remove the fan.
7. Install the new fan in reverse order.

Roof fan (with options +C128 and +H353)

1. Stop the drive and do the steps in section
before you start the work.
2. Open the cabinet door.
3. Remove the finger guard.
4. Disconnect the fan wiring.
5. Remove the fastening screws.
6. Remove the fan.
7. Install a new fan in reverse order.
Different roof fan models
Electrical safety precautions (page 21)
Electrical safety precautions (page 21)