Table of Contents
Advertisement
The image is too blurred.
Please adjust the focus (see page 8).
The image on is too dark.
You may need to take pictures or movies
in the place with adequate light or use the
flash strobe.
Sound playback is not
available when viewing the
movie on the LCD display.
This situation is normal. If you want the
movie with sound playback, please copy
the movie to your computer and view it on
the computer.
Noise occurs on my camera
when viewing the image on
the LCD display or on the
computer.
Set the filter matching the place you are.
Please refer to the "More on flicker"
section on page 33.
When connecting the camera to your computer
The driver installation failed.
O Please remove the driver and other
related programs. Follow the installation
steps in this manual to reinstall.
® Install the driver before inserting the
USB cable.
A conflict with other installed
camera or capture device.
If you have any other camera or capture
device, completely remove the camera
and its driver form the computer to avoid
a driver conflict.
The movie cannot be played
on my computer.
Please install DirectX 8.0 or above. (See
the "Installing the PocketCam X driver"
section on page 17 or download DirectX
8.0 and get more information on Microsoft
website.)
Noise occurs on my computer
when using Video
Conferencing.
Set the filter matching the place you are.
Please refer to the "Banding Filter" section
on page 29.
~ 31 ~
Advertisement
Table of Contents
