Table of Contents
Advertisement
WALL MOUNTING
USING THE WALL MOUNT
ADAPTOR
1. Position the wall mount bracket
on the Base Unit.
Line up the tabs on the wall mount
adaptor with the holes on the bottom
of the Base Unit . Snap the wall
mount bracket firmly in place.
2. Mount the Base Unit on the wall.
Position the Base Unit so the
mounting studs will fit into the holes
on the bottom of the Base Unit.
Position the power cord to extend
down the wall the phone is to be
mounted on. Slide the Base Unit
down on the mounting studs until it
locks into place.
3. Plug in the AC adaptor.
Plug the AC adaptor into an electrical
outlet, and the DC connector to the
back of the Base Unit. If the Handset
battery pack has not been charged
place
previously,
the Handset in
the Base Unit cradle, and allow it
charge
to
for 16 hours.
4. Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end. Insert one
of the plugs into the jack on the
bottom of the Base Unit. Insert the
other end of the plug into the wall
jack.
1 1
Advertisement
Table of Contents
