Handset Operation
Flash Function
You can use your i 5801 with services such as Call
Waiting. Simply press the ON key on the Handset or
the FLASH key on the Base (when in speakerphone
mode) to flash the line.
Conference Calling
The i 5801 is capable of supporting conference calls with up to two registered
Handsets, and the Base Unit.
To enter a conference call, simply access the line with two or more extensions
by pressing ON (or SPEAKERPHONE) on the Handset or SPEAKERPHONE on
the Base.
The phone icon
and two or more extension numbers will be displayed in
the upper left corner of the Handset.
Transferring Calls
You can transfer calls from your i 5801 to other registered Handsets or to the
Base without notification (Blind Transfer) or with notification (Announced
Transfer) by doing the following steps:
Blind Transfer
•
Press the joystick in then press
•
Press the joystick in again for confirmation.
•
The ringing Handset or Base can pick up the transferred call just like any
incoming call.
Announced Transfer
•
Press HOLD to place your call on hold.
•
Press the joystick in then press
•
Press the joystick in again then press
•
For confirmation, press the joystick in again.
•
When the ringing Handset or Base answers, announce that there's an
active call on hold.
•
Press OFF (on the Handset) or INTERCOM (on the Base)
•
Press ON (on the 'destination' Handset or SPEAKER PHONE (on the Base)
to pick up the call on hold.
•
Press ON (on the 'destination' Handset ) to pick up the call on hold.
or
to the desired destination.
to INTERCOM.
or
to the desired destination.
2 5