Bruno CURB-SIDER VSL-6000G Operator's Manual page 16

STEP 9.2
• Slide the cover up, rotating the cover
approximately 90 degrees to provide access to
the base motor.
NOTE: Hold the cover up and out of your way as
you locate the emergency crank.
• Once the cover is raised over the motor, you may
wish to rotate it 90 degrees and tuck it behind the
motor.
• Locate the emergency crank.
NOTE: VSL-6000 (450 lb model)
includes a rubber boot
that must emoved in
order to use the
emergency crank on the
motor shaft.
STEP 9.3
• Place the emergency crank over the motor shaft
as shown.
• Rotate the crank until the lift has returned to
its home position.
• Remove the crank from the motor and store it
in the vehicle glove box.
• Have the lift examined by an authorized Bruno
dealer.
VSL-6000G/6900G Operator's 04-07-2022
motor shaft
rubber boot
16
emergency crank
Bruno Independent Living Aids