Vsl-6900: Special Operating Instructions - Bruno CURB-SIDER VSL-6000G Operator's Manual

7.0 VSL-6900: SPECIAL OPERATING INSTRUCTIONS

STEP 7.1
The VSL-6900 features a telescoping lift head that
extends up to 8" (20 cm) and is able to lift a mobility
device weighing up to 400 lb (181 kg) into a vehicle
whose door/hatch opening is narrow.
• Lift up the lift arm.
• Depress and hold the OUT button on control
pendant to rotate the lift arm out of the vehicle.
• Release the OUT button when the lift arm is
perpendicular to the vehicle rear bumper.
• Depress and hold the EXTEND button on the
control pendant.
• Release the EXTEND button when lift arm,
when rotated further, will not contact vehicle.
• Depress the OUT button to continue rotating
the lift.
• Release the OUT button when lift is in correct
position over scooter or wheelchair to be lifted.
STEP 7.2
• Depress and hold the DOWN button on the
control pendant to lower the pick-up device.
• Release the DOWN button when the pick-up
device is slightly below the docking device.
• Attach the pick-up device to the docking device.
• Depress and hold the UP button on control pendant.
• Release the UP button when the mobility device
reaches a height where it will clear the vehicle
rear bumper/tailgate.
• Depress and hold the IN button on the control
pendant to rotate the mobility device to the
rear opening of the vehicle.
• Release the IN button when the mobility device
reaches the proper position for loading into the
vehicle.
Bruno Independent Living Aids
13
VSL-6000G/6900G Operator's 04-07-2022